{"title":"Dimmer Switches","description":"\u003cp\u003eRotary brass dimmers with a knurled knob, LED-compatible and flicker-tested. 150W LED \/ 300W incandescent, UL listed.\u003c\/p\u003e\u003cp\u003eA dimmer is where most decorative switches fail: buzzing, flickering, LEDs that won't turn on at the low end. Ours use a UL-listed module rated for 150W of LED load, tested against the bulbs on our LED compatibility list. The solid brass knob turns smoothly from off to full, with a push-to-toggle action. Single pole and 3-way versions, alone or combined with toggle switches on 2 and 3-gang plates. If you're unsure whether your bulbs will dim cleanly, check the list or email us the bulb model.\u003c\/p\u003e","products":[{"product_id":"1-gang-brass-rotary-dimmer-switch","title":"1-Gang Rotary Dimmer Switch","description":"\u003cp\u003eA solid brass rotary dimmer with a knurled knob, for a standard US single-gang box. Push to switch on and off, turn to dim. The module is rated for 150W of dimmable LED or 300W incandescent, UL\/ETL listed, and tested against the bulbs on our LED compatibility list at 10%, 50% and 100% for flicker and buzz. Single pole or 3-way. Same plate, same finishes, same screws as our toggle switches.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid brass plate and knurled knob, approx. 1.7 lbs\u003c\/li\u003e\n\u003cli\u003eUL\/ETL listed dimmer module, 120V AC 60Hz\u003c\/li\u003e\n\u003cli\u003e150W dimmable LED \/ 300W incandescent-halogen, min. load 10W\u003c\/li\u003e\n\u003cli\u003ePush on\/off, rotary dim from low to full\u003c\/li\u003e\n\u003cli\u003eSingle pole or 3-way (pairs with a standard 3-way switch)\u003c\/li\u003e\n\u003cli\u003eFits standard US single-gang boxes · neutral wire not required\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBuying for a whole project?\u003c\/strong\u003e Designers, builders and electricians get 10% off every product plus volume pricing. \u003ca href=\"\/pages\/trade-program\"\u003eApply for a trade account\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eWhy solid brass\u003c\/h3\u003e\u003cp\u003eMost \"brass\" switches are painted steel or plated zinc: a few microns of colour on a light base that chips at the screw holes and looks flat next to real metal. Ours are cut from 0.080\" (2 mm) solid brass sheet, so the plate has the weight, the edge and the depth of colour that only solid metal gives. A magnet will not stick to it. It can be refinished decades from now. And the mechanism behind it is a UL\/ETL listed component, not a decorative part, so it wires like any switch your electrician has fitted before.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 solid brass 1-gang rotary dimmer, plate, knob and module assembled\u003c\/li\u003e\n\u003cli\u003e2 × 6-32 brass mounting screws, matching finish\u003c\/li\u003e\n\u003cli\u003ePrinted wiring and installation guide with LED compatibility list\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eLED compatibility\u003c\/h3\u003e\u003cp\u003eDimmers are where most decorative switches fail: buzzing, flickering, bulbs that will not come on at the low end. We test ours against real bulbs and publish the list. Rules of thumb: use dimmable LED bulbs only, keep total wattage under 150W, never put two dimmers on the same circuit, and do not combine a dimmer with smart bulbs. Not sure about yours? Email the bulb model to info@oxidehardware.com and we will tell you, or test it.\u003c\/p\u003e\u003ch3\u003eSingle pole or 3-way?\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSingle pole:\u003c\/strong\u003e the light is controlled from this one spot. \u003cstrong\u003e3-way:\u003c\/strong\u003e the light is also switched from a second location; the 3-way dimmer pairs with one standard 3-way toggle switch. Only one dimmer per circuit.\u003c\/p\u003e\u003ch3\u003eFinish \u0026amp; care\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eUnlacquered Brass\u003c\/strong\u003e arrives bright and darkens where it is touched; that living patina is the point. \u003cstrong\u003eAged Brass\u003c\/strong\u003e is hand-darkened to a deep bronze tone and stays that way. \u003cstrong\u003eSatin Brass\u003c\/strong\u003e is evenly brushed, pale and matte. Wipe unlacquered brass with a dry cloth only; aged and satin with a damp cloth. No polish, no chemicals. Every finish is made against the same master sample, so switches, plates and cabinet hardware ordered months apart still match.\u003c\/p\u003e\u003cp\u003eNot sure which finish? The \u003ca href=\"\/products\/brass-finish-sample-set\"\u003e$25 finish sample set\u003c\/a\u003e is credited back on your first order over $150.\u003c\/p\u003e","brand":"Oxide Hardware","offers":[{"title":"Unlacquered Brass \/ Single Pole","offer_id":54487997219134,"sku":"OX-DM1-UB-SP","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Unlacquered Brass \/ 3-Way","offer_id":54487997251902,"sku":"OX-DM1-UB-3W","price":119.0,"currency_code":"USD","in_stock":true},{"title":"Aged Brass \/ Single Pole","offer_id":54487997284670,"sku":"OX-DM1-AB-SP","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Aged Brass \/ 3-Way","offer_id":54487997317438,"sku":"OX-DM1-AB-3W","price":119.0,"currency_code":"USD","in_stock":true},{"title":"Satin Brass \/ Single Pole","offer_id":54487997350206,"sku":"OX-DM1-SB-SP","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Satin Brass \/ 3-Way","offer_id":54487997382974,"sku":"OX-DM1-SB-3W","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2131\/4622\/files\/hf_20260922_084151_4dda2856-22e8-4fc7-a61d-be42cf02df71.png?v=1790067357"},{"product_id":"2-gang-brass-dimmer-switch","title":"2-Gang Dimmer Switch","description":"\u003cp\u003eA solid brass 2-gang plate with two rotary dimmers, or one dimmer and one toggle switch. This is the living-room wall: overhead lights on the dimmer, the sconces on the toggle, all in one plate. Each dimmer module is rated for 150W of dimmable LED and UL\/ETL listed; each toggle is a 15A single pole. Fits a standard US 2-gang box.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid brass plate, knurled knobs and levers, approx. 2.6 lbs\u003c\/li\u003e\n\u003cli\u003eUL\/ETL listed modules, 120V AC 60Hz\u003c\/li\u003e\n\u003cli\u003eDimmer: 150W dimmable LED \/ 300W incandescent, min. 10W, neutral not required\u003c\/li\u003e\n\u003cli\u003eToggle: 15A single pole (3-way available on request)\u003c\/li\u003e\n\u003cli\u003eFits standard US 2-gang boxes, new work and old work\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBuying for a whole project?\u003c\/strong\u003e Designers, builders and electricians get 10% off every product plus volume pricing. \u003ca href=\"\/pages\/trade-program\"\u003eApply for a trade account\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eWhy solid brass\u003c\/h3\u003e\u003cp\u003eMost \"brass\" switches are painted steel or plated zinc: a few microns of colour on a light base that chips at the screw holes and looks flat next to real metal. Ours are cut from 0.080\" (2 mm) solid brass sheet, so the plate has the weight, the edge and the depth of colour that only solid metal gives. A magnet will not stick to it. It can be refinished decades from now. And the mechanism behind it is a UL\/ETL listed component, not a decorative part, so it wires like any switch your electrician has fitted before.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 solid brass 2-gang plate with dimmer and toggle (or two dimmers) assembled\u003c\/li\u003e\n\u003cli\u003e4 × 6-32 brass mounting screws, matching finish\u003c\/li\u003e\n\u003cli\u003ePrinted wiring and installation guide with LED compatibility list\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich configuration?\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDimmer + Toggle:\u003c\/strong\u003e the most common living-room setup; dimmer on the left, toggle on the right (tell us if you want it the other way round). \u003cstrong\u003e2× Dimmer:\u003c\/strong\u003e two independently dimmed circuits, for example ceiling lights and wall lights. Need a 3-way toggle or a 3-way dimmer in the mix? Email us and we build it at the same price.\u003c\/p\u003e\u003ch3\u003eLED compatibility\u003c\/h3\u003e\u003cp\u003eUse dimmable LED bulbs only, keep each dimmer under 150W, one dimmer per circuit. Not sure about your bulbs? Email the model to info@oxidehardware.com and we will check it against our tested list.\u003c\/p\u003e\u003ch3\u003eFinish \u0026amp; care\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eUnlacquered Brass\u003c\/strong\u003e arrives bright and darkens where it is touched; that living patina is the point. \u003cstrong\u003eAged Brass\u003c\/strong\u003e is hand-darkened to a deep bronze tone and stays that way. \u003cstrong\u003eSatin Brass\u003c\/strong\u003e is evenly brushed, pale and matte. Wipe unlacquered brass with a dry cloth only; aged and satin with a damp cloth. No polish, no chemicals. Every finish is made against the same master sample, so switches, plates and cabinet hardware ordered months apart still match.\u003c\/p\u003e\u003cp\u003eNot sure which finish? The \u003ca href=\"\/products\/brass-finish-sample-set\"\u003e$25 finish sample set\u003c\/a\u003e is credited back on your first order over $150.\u003c\/p\u003e","brand":"Oxide Hardware","offers":[{"title":"Unlacquered Brass \/ Dimmer + Toggle","offer_id":54487997546814,"sku":"OX-DM2-UB-DT","price":179.0,"currency_code":"USD","in_stock":true},{"title":"Unlacquered Brass \/ 2× Dimmer","offer_id":54487997579582,"sku":"OX-DM2-UB-DD","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Aged Brass \/ Dimmer + Toggle","offer_id":54487997612350,"sku":"OX-DM2-AB-DT","price":179.0,"currency_code":"USD","in_stock":true},{"title":"Aged Brass \/ 2× Dimmer","offer_id":54487997645118,"sku":"OX-DM2-AB-DD","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Satin Brass \/ Dimmer + Toggle","offer_id":54487997677886,"sku":"OX-DM2-SB-DT","price":179.0,"currency_code":"USD","in_stock":true},{"title":"Satin Brass \/ 2× Dimmer","offer_id":54487997710654,"sku":"OX-DM2-SB-DD","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2131\/4622\/files\/hf_20260922_084152_8d6e1afc-27f9-48fa-9717-23ceb360f569.png?v=1790067383"},{"product_id":"3-gang-brass-dimmer-switch","title":"3-Gang Dimmer Switch","description":"\u003cp\u003eA solid brass 3-gang plate with your mix of rotary dimmers and toggle switches: one dimmer and two toggles for a kitchen, two dimmers and a toggle for an open-plan living room, or three dimmers for a dining room that needs to do everything. Each dimmer is rated for 150W of dimmable LED and UL\/ETL listed; each toggle is a 15A single pole. Fits a standard US 3-gang box.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid brass plate, knurled knobs and levers, approx. 3.5 lbs\u003c\/li\u003e\n\u003cli\u003eUL\/ETL listed modules, 120V AC 60Hz\u003c\/li\u003e\n\u003cli\u003eDimmer: 150W dimmable LED \/ 300W incandescent, min. 10W, neutral not required\u003c\/li\u003e\n\u003cli\u003eToggle: 15A single pole (3-way available on request)\u003c\/li\u003e\n\u003cli\u003eFits standard US 3-gang boxes, new work and old work\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBuying for a whole project?\u003c\/strong\u003e Designers, builders and electricians get 10% off every product plus volume pricing. \u003ca href=\"\/pages\/trade-program\"\u003eApply for a trade account\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eWhy solid brass\u003c\/h3\u003e\u003cp\u003eMost \"brass\" switches are painted steel or plated zinc: a few microns of colour on a light base that chips at the screw holes and looks flat next to real metal. Ours are cut from 0.080\" (2 mm) solid brass sheet, so the plate has the weight, the edge and the depth of colour that only solid metal gives. A magnet will not stick to it. It can be refinished decades from now. And the mechanism behind it is a UL\/ETL listed component, not a decorative part, so it wires like any switch your electrician has fitted before.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 solid brass 3-gang plate with your mix of dimmers and toggles assembled\u003c\/li\u003e\n\u003cli\u003e6 × 6-32 brass mounting screws, matching finish\u003c\/li\u003e\n\u003cli\u003ePrinted wiring and installation guide with LED compatibility list\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich configuration?\u003c\/h3\u003e\u003cp\u003eDimmers are fitted on the left, toggles on the right, unless you tell us otherwise in the cart note. \u003cstrong\u003eDimmer + 2× Toggle:\u003c\/strong\u003e kitchens and entries. \u003cstrong\u003e2× Dimmer + Toggle:\u003c\/strong\u003e open-plan living. \u003cstrong\u003e3× Dimmer:\u003c\/strong\u003e dining rooms and media rooms. Need a 3-way anywhere? Email us the layout and we build it at the same price.\u003c\/p\u003e\u003ch3\u003eLED compatibility\u003c\/h3\u003e\u003cp\u003eUse dimmable LED bulbs only, keep each dimmer under 150W, one dimmer per circuit. Not sure about your bulbs? Email the model to info@oxidehardware.com and we will check it against our tested list.\u003c\/p\u003e\u003ch3\u003eFinish \u0026amp; care\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eUnlacquered Brass\u003c\/strong\u003e arrives bright and darkens where it is touched; that living patina is the point. \u003cstrong\u003eAged Brass\u003c\/strong\u003e is hand-darkened to a deep bronze tone and stays that way. \u003cstrong\u003eSatin Brass\u003c\/strong\u003e is evenly brushed, pale and matte. Wipe unlacquered brass with a dry cloth only; aged and satin with a damp cloth. No polish, no chemicals. Every finish is made against the same master sample, so switches, plates and cabinet hardware ordered months apart still match.\u003c\/p\u003e\u003cp\u003eNot sure which finish? The \u003ca href=\"\/products\/brass-finish-sample-set\"\u003e$25 finish sample set\u003c\/a\u003e is credited back on your first order over $150.\u003c\/p\u003e","brand":"Oxide Hardware","offers":[{"title":"Unlacquered Brass \/ Dimmer + 2× Toggle","offer_id":54487997808958,"sku":"OX-DM3-UB-DTT","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Unlacquered Brass \/ 2× Dimmer + Toggle","offer_id":54487997841726,"sku":"OX-DM3-UB-DDT","price":269.0,"currency_code":"USD","in_stock":true},{"title":"Unlacquered Brass \/ 3× Dimmer","offer_id":54487997874494,"sku":"OX-DM3-UB-DDD","price":289.0,"currency_code":"USD","in_stock":true},{"title":"Aged Brass \/ Dimmer + 2× Toggle","offer_id":54487997907262,"sku":"OX-DM3-AB-DTT","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Aged Brass \/ 2× Dimmer + Toggle","offer_id":54487997940030,"sku":"OX-DM3-AB-DDT","price":269.0,"currency_code":"USD","in_stock":true},{"title":"Aged Brass \/ 3× Dimmer","offer_id":54487997972798,"sku":"OX-DM3-AB-DDD","price":289.0,"currency_code":"USD","in_stock":true},{"title":"Satin Brass \/ Dimmer + 2× Toggle","offer_id":54487998005566,"sku":"OX-DM3-SB-DTT","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Satin Brass \/ 2× Dimmer + Toggle","offer_id":54487998038334,"sku":"OX-DM3-SB-DDT","price":269.0,"currency_code":"USD","in_stock":true},{"title":"Satin Brass \/ 3× Dimmer","offer_id":54487998071102,"sku":"OX-DM3-SB-DDD","price":289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2131\/4622\/files\/hf_20260922_084151_42947159-5ab1-4383-ab90-cc047d3bb616.png?v=1790067383"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2131\/4622\/collections\/hf_20260922_084151_4dda2856-22e8-4fc7-a61d-be42cf02df71.png?v=1790067504","url":"https:\/\/oxidehardware.com\/collections\/dimmer-switches.oembed","provider":"Oxide Hardware","version":"1.0","type":"link"}