Multi-gang switches & dimmers
One plate for every switch on the wall
A 4-gang in plastic looks like a fuse box. In solid brass it looks like architecture.
Dimmer + toggle
2-gang. Push on, turn to dim the main light; flip for the second circuit.
Shop the 2-gang
Dimmer + two toggles
3-gang. The kitchen or living room entrance, in one solid brass plate.
Shop the 3-gang
Three toggles
3-gang. Hallways, stairs and open-plan rooms with three circuits.
Shop the 3-gang toggle
4 gangs, your layout
Any mix of toggles and rotary dimmers, machined into one plate.
Build your own plate
Build Your Own Multi-Gang Plate
Your layout, one solid brass plate.
Choose 2 to 4 gangs, set toggles and rotary dimmers in the order you want, pick the finish. We machine one plate to your layout and send you the drawing to confirm before we cut the brass.
Standard US gang spacing, standard terminals: your electrician wires it like any other switch.
The collection
Switches & dimmers
Whole-room & whole-house
Do the whole house in one finish
Count the switches room by room and order them together, so every plate matches. Send your switch list or plans to info@oxidehardware.com and we return a priced list in one finish.
Kitchen
A 3-gang at the entrance for ceiling, pendants and under-cabinet lights, a dimmer over the island.
Start with the 3-gang
Living & dining
Rotary dimmers for the evening light, paired with a toggle for lamps and sconces.
Shop dimmers
Hallways & bedrooms
3-way toggles at both ends of the hall, a dimmer by the bed. Same finish through every room.
Shop togglesStart with the finish
Three finishes. One brass.
Every switch, dimmer and plate comes in the same three finishes, made against one master sample, so the whole house matches.
Unlacquered Brass
Raw, uncoated brass. Bright on day one, warm amber where you touch it by year one. For people who want a living finish.
Shop Unlacquered Brass
Aged Brass
Hand-darkened, then sealed. The look of thirty-year-old brass, stable from the day it arrives.
Shop Aged Brass
Satin Brass
Brushed and lacquered. Warm, even, fingerprint-resistant. Our most popular finish for kitchens.
Shop Satin Brass
Trade program
Designers, builders, electricians.
10% off every product from the first order, volume pricing from 10 pieces, spec sheets for every product, and one person to call.
Solid, not plated
Most “brass” switch plates are painted steel.
Ours are made from solid brass. They don't chip, they don't flake, and they age like the hardware in a hundred-year-old house.
Proven, not just claimed. Put a magnet on it: nothing sticks. Solid brass all the way through.
Installation
Ten minutes, one screwdriver.
Every product comes with a printed guide. Single-pole and 3-way wiring diagrams included. Still unsure? Email a photo of your box and we'll tell you exactly what to order.
Questions
Before you order
Product
Yes. Every plate uses standard US single-gang spacing and standard 6-32 screws, so it mounts to the box you already have. Multi-gang plates fit standard ganged boxes.
Yes. The 2-gang and 3-gang combinations pair a rotary dimmer with toggles, and Build Your Own Multi-Gang Plate takes 2 to 4 gangs in any mix of toggles and dimmers, on one solid brass plate.
Yes. The mechanisms are rated 15A 125V and wire exactly like a standard switch or dimmer. Single-pole and 3-way diagrams are in the box.
Unlacquered Brass is raw and patinas with use. Aged Brass starts dark and stays that way. Satin Brass is brushed, sealed and fingerprint-resistant. The $25 finish sample set shows all three; use code SAMPLES25 on your first order over $150 to get it back.
On purpose. It goes from bright gold to a deep warm amber over the years, like the hardware in a period home. If you'd rather keep it bright, a soft cloth and a little brass polish bring it back in a minute.
Yes. Professionals get 10% off or more with quantity, on every product. Apply for a trade account.